Rokade Rototechniks Logo

home

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 

Inhouse Balancing, Vibration Analysis, Field Balancing, Rotor Repair & Services, Horizontal / Vertical Balancing Machine , Instrumentation For Balancing Machines, Portable Balancer & Analyser,  Vibration Monitoring Systems

 
 

 
 

Vibration Analyzer and Balancer - BALTECH VP-3460

  • vp32601
  • vp32602
  • css image gallery
  • vp32604

Unbalance is a main reason of increased vibration of rotating machinery, which resultsin heating of bearing assemblies. This leads to rapid wear of bearings, shafts and other parts, increased vibration and noise level as well as to loss of efficiency of the machinery. Unbalance elimination is a difficult task and requires complex measurement equipment and experienced personnel. The new multifunctional kit BALTECH VP-3460 makes the field balancing (balancing of rotors in their own bearings) easy and simple. BALTECH VP-3460 was specially developed to facilitate work of mechanics and power engineers. The modified electronic circuit and BALTECH-Expert software make it possible to store the vibration and temperature data in the -55oC...+130oC range, connect tachometers (or stroboscope) or use two vibration channels. The vibration standards are included into the regulatory requirements on assurance of reliability of rotating equipment (fans, exhaust fans, electrical machinery, pumps, compressors, mixers, centrifuges, cages, gearboxes).

Advantages

  • Vibration measurement as per 10816 (vibration displacement, vibration velocity)
  • Balancing of rotors on site (single-plane, dual plane)
  • Route measurement (storage of 250 measurement results)
  • Temperature control (contact thermometer)
  • Built-in vector calculator, trial weight calculation, Dynamic Influence Coefficient (DIC)

Measurements

  • Vibrometer
  • Tachometer
  • Thermometer
  • Phase meter
  • Analyser

Capability BALTECH VP-3460

  • Measurement of the RMS vibration velocity in the 10-1000 Hz range.
  • Measurement of the RMS vibration velocity and Peak-Peak vibration displacement at the rotational or random frequency.
  • Temperature control of the machinery and bearing assemblies in the -55oC...+130oC range. Extended range is an option.
  • Measurement of the rotation speed from 120 to 30000 RPM (option up to 120000 RPM) with the optical sensor or stroboscope.
  • Indication of the phase shift between the vibration. oscillation at the rotational frequency and tachometer signal.
  • Storage of up to 250 measurement results for further view in the BALTECH-Expert software.
  • Measurement at the rotation frequency harmonics (0.5, 1, 2, 3, 4, 5, 6, 7, 8, 9) F.
  • Vibration analysis in the 1/2 octave frequency bands in the 10÷500 Hz range.
  • Calculation of the trial weight.
  • Vector calculator for the vector addition and subtraction.
  • Measurements and calculations for dynamic balancing on site (3 planes, 4 points).
  • Dynamic Influence Coefficient (DIC).
  • Quality control of the alignment of built-up shafts on the basis of the analysis of their vibration parameters during operation.
  • The BALTECH-Expert software for PC- allows keeping the database and evaluating the machinery life time based on the vibration and temperature parameter trends.

The measurement data can be transferred to the BALTECH Expert software for trending.

Technical characteristics

Frequency range, Hz 10-1000
Range of RMS value of velocity, mm/s 0,1-99,9
Range of peak-to-peak displacement, μm 5-999
Temperature measurement range, °C -55...+130
Speed frequency range, RPM 120...30000
Speed frequency accuracy, % ±0.5
Measuring range of vibration vector phase, degrees 0÷359
Electric power supply Autonomous
From batteries
Time of autonomous work, hours Not less than 8
Complete weight, kg 5,8±0,1
Weight of the instrument, kg 208X100X40

Delivery set BALTECH VP-3460

# Name Basic
Art.No.
34-06
Comprehensive
Art. No.
34-07
1 Measuring instrument 1 1
1.1 Ni-MH battery, AA type 4 4
1.2 Battery charger 1 1
1.3 Ac adapter 1 1
1.4 Interface cable - 1
2 Vibration transducer with cable and magnet 1 1
2.1 Accessories for the vibration transducer 1 1
3 Frequency transducer with cable (L = 3 m) 1 1
3.1 Magnetic stand 1 1
3.2 Light-reflecting self-adhesive film 1 1
4 Led stroboscope - 1
5 Temperature converter with cable 1 1
6 Angle gauge - 1
7 Electronic scales 1 1
8 Small clamp 1 1
9 Large clamp 1 1
10 Scissors 1 1
11 White marker 1 1
12 Operation manual 1 1
13 BALTECH Expert software on CD - 1
14 BALTECH Expert software user manual - 1
15 BALTECH Expert software installation manual - 1
16 Carrying case 1 1
17 Package 1 1
 

Marketing Products

|  Dynamic Balancing Machines |  Vibration & Balancing Analyzer | Triaxial Wireless Accelerometer |  Vibration Monitoring |
|  Laser Shaft Alignment |  Thermal Imaging Device |  Dial Gauge Shaft alignment |  vibration analyzer and balancer |
|  Vibration Meter |  Oil & Lubrication Analysis |  Infrared Thermometer |  Bearing Induction Heaters |


Balancing Services

| Inhouse Balancing | Condition Monitoring & Vibration Analysis | Onsite Balancing Services | Laser Alignment |
Rotor Repair & Services Products | Training & Seminar  |

 

Our Locations

     
5, U.K. Industrial Estate, Behind Durian Furniture,
Opp. Oswal Park, 2nd Pokharan Rd,
Thane ( W ) - 400 601, (M.S)
 
4 / A Wing, Bharat Indl Estate, Off. Lake Road, Opp. Hind Rectifier Co.
Bhandup (W)
Mumbai – 400 078 (M.S)
 
 
R / 375, TTC Industrial Area, Rabale,
Navi Mumbai - 400701 (M.S)
 
Gat No # 256, Indrayani East, Jyotibanagar, Talawade, Pune 412 112 (M.S)