Rokade Rototechniks Logo


Javascript DHTML Drop Down Menu Powered by

Inhouse Balancing, Vibration Analysis, Field Balancing, Rotor Repair & Services, Horizontal / Vertical Balancing Machine , Instrumentation For Balancing Machines, Portable Balancer & Analyser,  Vibration Monitoring Systems



Dial Gauge Shaft Alignment - BALTAECH SA-4000

  • baltechsa40002
  • baltechsa40003
  • bootstrap carousel example
  • baltechsa40001

BALTECH SA-4000 is a tool kit for shaft alignment with dial indicators and without a unit for misalignment calculation. This is the inexpensive kit for horizontal and vertical shaft alignment. This tool kit doesn't include a measurement unit and is recommended for use by experienced specialists. The measurements are conducted with dial indicators. The received data is used to calculate the misalignment amount. If you want to extend your system up to BALTECH SA-4100, BALTECH SA-4200 or BALTECH SA-4300 you only need to purchase a measurement unit. The universal fixtures and rods are mounted on the shafts without clearances. To ensure proper alignment we recommend to use stainless steel shims BALTECH-23458N.

  • Horizontal shaft alignment;
  • Vertical shaft alignment;
  • Check and elimination of soft foot during alignment;
  • Alignment method selection: radiaxial method or dial indicator method

A user friendly menu, excellent image quality, ergonomics and intuitive operation of the inexpensive infrared camera BALTECH TR-0180 0 -all of this made us the leader in the thermography. You can purchase the infrared camera BALTECH TR-0180 and receive the free training TOP-104 "Thermography. Foundations of the non-destructive thermal monitoring" at our training centre. Our service centre provides the lifetime maintenance for all the BALTECH systems and accessories. The software BALTECH Expert is updated every year for free! The inexpensive infrared camera BALTECH TR-0180 (640 x 480 pixels) pays its way in three months.

For your convenience you can also purchase additional accessories: SD- card for storage of up to 11200 thermal images, narrow-angle and wide-angle lenses, lap-top or tablet computer, rack, battery, car charger, self-adhesive dark tape for polished objects and calibration certificate.

Technical characteristics

Number of indicators (dial) 2
Sensor type Dial indicator
Measurement range Not less than 10 mm
Measurement accuracy 0,01 mm
Maximum diameter of mating shafts (couplings):- with chains 600
- with magnets (options) Not limited
Rod length 320 mm

Marketing Products

|  Dynamic Balancing Machines |  Vibration & Balancing Analyzer | Triaxial Wireless Accelerometer |  Vibration Monitoring |
|  Laser Shaft Alignment |  Thermal Imaging Device |  Dial Gauge Shaft alignment |  vibration analyzer and balancer |
|  Vibration Meter |  Oil & Lubrication Analysis |  Infrared Thermometer |  Bearing Induction Heaters |

Balancing Services

| Inhouse Balancing | Condition Monitoring & Vibration Analysis | Onsite Balancing Services | Laser Alignment |
Rotor Repair & Services Products | Training & Seminar  |


Our Locations

5, U.K. Industrial Estate, Behind Durian Furniture,
Opp. Oswal Park, 2nd Pokharan Rd,
Thane ( W ) - 400 601, (M.S)
4 / A Wing, Bharat Indl Estate, Off. Lake Road, Opp. Hind Rectifier Co.
Bhandup (W)
Mumbai – 400 078 (M.S)
R / 375, TTC Industrial Area, Rabale,
Navi Mumbai - 400701 (M.S)
Gat No # 256, Indrayani East, Jyotibanagar, Talawade, Pune 412 112 (M.S)