Rokade Rototechniks Logo

home

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 

Inhouse Balancing, Vibration Analysis, Field Balancing, Rotor Repair & Services, Horizontal / Vertical Balancing Machine , Instrumentation For Balancing Machines, Portable Balancer & Analyser,  Vibration Monitoring Systems

 
 

 
 

Bearing Induction Heaters - BALTECH HI-1630

  • baltechhi16301
  • baltechhi16302
  • javascript slideshow
  • baltechhi16304

BALTECH HI-1630 is a small- size, lightweight, high-performance and cost-effective induction heater with an electronic control. The induction heating can be conducted horizontally and vertically. The heater has the function of automatic demagnetization of bearings upon reaching a defined temperature. The induction heater is intended to heat parts weighting 25-55 kg with a maximum outer diameter 480 mm.
For fast and reliable bearing assembling it is necessary to heat an inner ring. Remember, that a closed bearing with oil should not be heated because the oil will flow out and the bearing will go dry. The bearing assembling with the induction heater BALTECH HI-1630 is controlled by a microprocessor and temperature sensor.

Technical characteristics

Model BALTECH HI-1630
Electrics
Nominal power, kVA 3,6
Voltage , V/Current,A 220/16
Frequency, Hz 50
Rotatable yoke Yes
Heated part
Maximum bearing weight, kg 55
Minimum inner diameter d, mm 20
Maximum outer diameter D, mm 480
W, mm 120
H, mm 155
Yoke dimensions
Yoke width, mm 14;20;30;45
Yoke length, mm 250
Control panel
Temperature setting,oC
Maximum temperature,oC
240
Automatic power reduction Yes
Dimensions
Dimensions, mm 470 x 210 x 260
Heater weight (without yoke), kg 25
 

Marketing Products

| Dynamic Balancing Machines |  Vibration & Balancing Analyzer | Triaxial Wireless Accelerometer |  Vibration Monitoring |
|  Laser Shaft Alignment |  Thermal Imaging Device |  Dial Gauge Shaft alignment |  vibration analyzer and balancer |
|  Vibration Meter |  Oil & Lubrication Analysis |  Infrared Thermometer |  Bearing Induction Heaters |


Balancing Services

| Inhouse Balancing | Condition Monitoring & Vibration Analysis | Onsite Balancing Services | Laser Alignment |
Rotor Repair & Services Products | Training & Seminar  |

 

Our Locations

     
5, U.K. Industrial Estate, Behind Durian Furniture,
Opp. Oswal Park, 2nd Pokharan Rd,
Thane ( W ) - 400 601, (M.S)
 
4 / A Wing, Bharat Indl Estate, Off. Lake Road, Opp. Hind Rectifier Co.
Bhandup (W)
Mumbai – 400 078 (M.S)
 
 
R / 375, TTC Industrial Area, Rabale,
Navi Mumbai - 400701 (M.S)
 
Gat No # 256, Indrayani East, Jyotibanagar, Talawade, Pune 412 112 (M.S)