Rokade Rototechniks Logo

home

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 

Inhouse Balancing, Vibration Analysis, Field Balancing, Rotor Repair & Services, Horizontal / Vertical Balancing Machine , Instrumentation For Balancing Machines, Portable Balancer & Analyser,  Vibration Monitoring Systems

 
 

 
 

Dial Gauge Shaft Alignment - BALTAECH SA-4200

  • baltecgsa42001
  • baltecgsa42002
  • bootstrap image slider
  • baltecgsa42004

During repair of dynamic equipment it is important to perform shaft alignment and balancing. BALTECH SA-4200 is a system for alignment of electric motors with digital electronic indicators on the bases of a pocket computer. The system is designed to perform the shaft alignment of horizontal and vertical machines. During the repair and set-up of the dynamic machines it is recommended to check piping tension, replace bearings, check for soft foot and compensate thermal growth. To ensure fast and precise alignment of electric motors always use the calibration steel shims BALTECH-23458N Series.

BALTECH SA-4200 Functions

  • Shaft alignment of horizontal electric motors 9-0-3;
  • Check and elimination of soft foot during the alignment of electric motors;
  • Compensation of shaft floating on oil wedge (shaft alignment of sleeve bearings);
  • Shaft alignment of vertical electric motors 9-0-3;
  • Selection between the alignment methods: radiaxial method or dial indicator method;
  • Built-in digital camera

Technical characteristics

Number of indicators (dial) 2
Sensor type Dial indicator
Measurement range Not less than 12,5 mm
Measurement accuracy 0,01 mm
Maximum diameter of mating shafts (couplings):- with chains 600
- with magnets (options) Not limited
Rod length 290 mm
Measurement unit Pocket PC
Operation temperature -15oc...+45oc
 

Marketing Products

|  SCHENCK Dynamic Balancing Machines |  Vibration & Balancing Analyzer | Triaxial Wireless Accelerometer |  Vibration Monitoring |
|  Laser Shaft Alignment |  Thermal Imaging Device |  Dial Gauge Shaft alignment |  vibration analyzer and balancer |
|  Vibration Meter |  Oil & Lubrication Analysis |  Infrared Thermometer |  Bearing Induction Heaters |


Balancing Services

| Inhouse Balancing | Condition Monitoring & Vibration Analysis | Onsite Balancing Services | Laser Alignment |
Rotor Repair & Services SCHENCK Products | Training & Seminar  |

 

Our Locations

     
5, U.K. Industrial Estate, Behind Durian Furniture,
Opp. Oswal Park, 2nd Pokharan Rd,
Thane ( W ) - 400 601, (M.S)
 
4 / A Wing, Bharat Indl Estate, Off. Lake Road, Opp. Hind Rectifier Co.
Bhandup (W)
Mumbai – 400 078 (M.S)
 
 
R / 375, TTC Industrial Area, Rabale,
Navi Mumbai - 400701 (M.S)
 
Gat No # 256, Indrayani East, Jyotibanagar, Talawade, Pune 412 112 (M.S)