Rokade Rototechniks Logo

home

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 

Inhouse Balancing, Vibration Analysis, Field Balancing, Rotor Repair & Services, Horizontal / Vertical Balancing Machine , Instrumentation For Balancing Machines, Portable Balancer & Analyser,  Vibration Monitoring Systems

 
 

 
 

Dial Gauge Shaft Alignment - BALTAECH SA-4100

  • baltechsa41001
  • baltechsa41002
  • css image gallery
  • baltechsa41004

The BALTECH SA-4100 shaft alignment system with dial indicators on the basis of a pocket computer is intended to perform shaft alignment of horizontal and vertical pumps and fans. The system has a tape with a liquid level for precise installation of the dial indicators. The device is low cost and high-performance. BALTECH SA-4100 has the pocket computer with a program for misalignment calculation. The program calculates the required movements of the electric motor front and rear feet based on three of four points. You can select between two alignment methods: radiaxial method and dial indicator method. Note, that it is not recommended to use mechanical fixtures with radiaxial method for sleeve bearings. BALTECH SA-4100 is easily extended to BALTECH SA-4200 or BALTECH SA-4300.
We recommend to use the calibration metal shims BALTECH-23458N.

BALTECH SA-4100 Functions

  • Shaft alignment of horizontal pumps and fans 9-0-3;
  • Shaft alignment of vertical pumps and fans 9-0-3;
  • Check and elimination of soft foot during the shaft alignment;
  • Thermal growth compensation;
  • Selection between the alignment methods: radiaxial method or dial indicator method;
  • Built-in digital camera

Technical characteristics

Number of indicators (dial) 2
Sensor type Dial indicator
Measurement range Not less than 10 mm
Measurement accuracy 0,01 mm
Maximum diameter of mating shafts (couplings):- with chains 600
- with magnets (options) Not limited
Rod length 320 mm
Measurement unit Pocket PC
Operation temperature -15oc...+45oc
 

Marketing Products

|  SCHENCK Dynamic Balancing Machines |  Vibration & Balancing Analyzer | Triaxial Wireless Accelerometer |  Vibration Monitoring |
|  Laser Shaft Alignment |  Thermal Imaging Device |  Dial Gauge Shaft alignment |  vibration analyzer and balancer |
|  Vibration Meter |  Oil & Lubrication Analysis |  Infrared Thermometer |  Bearing Induction Heaters |


Balancing Services

| Inhouse Balancing | Condition Monitoring & Vibration Analysis | Onsite Balancing Services | Laser Alignment |
Rotor Repair & Services SCHENCK Products | Training & Seminar  |

 

Our Locations

     
5, U.K. Industrial Estate, Behind Durian Furniture,
Opp. Oswal Park, 2nd Pokharan Rd,
Thane ( W ) - 400 601, (M.S)
 
4 / A Wing, Bharat Indl Estate, Off. Lake Road, Opp. Hind Rectifier Co.
Bhandup (W)
Mumbai – 400 078 (M.S)
 
 
R / 375, TTC Industrial Area, Rabale,
Navi Mumbai - 400701 (M.S)
 
Gat No # 256, Indrayani East, Jyotibanagar, Talawade, Pune 412 112 (M.S)