Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 

Inhouse Balancing, Vibration Analysis, Field Balancing, Rotor Repair & Services, Horizontal / Vertical Balancing Machine , Instrumentation For Balancing Machines, Portable Balancer & Analyser,  Vibration Monitoring Systems

 
 

 
 

Dial Gauge Shaft Alignment - BALTAECH FG

  • baltechfg1
  • baltechfg2
  • javascript photo gallery
  • baltechfg4

The set of calibration gauges (gauge) is made of tampered stainless steel and brass. The measurement gauges BALTECH FG Series are intended to measure clearances in different fields, e.g. in motor-building, for adjustment of valve clearances, radial clearances in bearings and during alignment works (determination of half coupling gaps and << soft foot >> type), etc. The set of gauges (gauge) are delivered in size 75, 100, 150, 200, 300, 500, 1000mm. We can also supply you with straps in thickness from 0.01 up to 2.0 mm for gauge making, as well as single measurement gauges upon request (with a holder). The measurement gauges can be cylindrical or taper.

The set of calibration gauges (gauge) are normal gages in the form of calibration shims of a certain thickness. The gauges are used to control clearances between planes or deflected position detectors. The measurement gauges are necessary to measure very small distances (e.g. just thicker than a sheet of paper). The gauge can be flat or V-shaped. The gauge can be produced in the form of set of sheets in different thickness in a single holder. The gauge is used separately or in different combinations. The measurements are conducted based on the principle is inserted- is not inserted.
The sheets are inserted one by one into a measured clearance till one of the sheets is inserted hardly and the next is not inserted at all. The V-shaped gauge is carefully moved to a clearance till it stops after which a thickness specified on the gauge front surface is recorded.

Advantages of the measurement gauges (gauge) BALTECH FG:

  • easy to use;
  • high measurement accuracy.

The set of calibration gauges (gauge) are normal gages in the form of calibration shims of a certain thickness. The gauges are used to control clearances between planes or deflected position detectors. The measurement gauges are necessary to measure very small distances (e.g. just thicker than a sheet of paper). The gauge can be flat or V-shaped. The gauge can be produced in the form of set of sheets in different thickness in a single holder. The gauge is used separately or in different combinations. The measurements are conducted based on the principle «is inserted- is not inserted.
The sheets are inserted one by one into a measured clearance till one of the sheets is inserted hardly and the next is not inserted at all. The V-shaped gauge is carefully moved to a clearance till it stops after which a thickness specified on the gauge front surface is recorded.

Technical characteristics- gauges, set of gauges, measurement gauges

Set of standard and long gauges BALTECH FG Series
Set 8 pcs.
0,05-0,5 mm
Set 13 pcs.
0,05-1 mm
Set 20 pcs.
0,05-1 mm
Set 20 pcs.
0,1-2 mm
L mm
BALTECH FG-81 BALTECH FG-131 BALTECH FG-201 BALTECH FG-201-2 1000
BALTECH FG-82 BALTECH FG-132 BALTECH FG-202 BALTECH FG-202-2 500
BALTECH FG-83 BALTECH FG-133 BALTECH FG-203 BALTECH FG-203-2 300
BALTECH FG-84 BALTECH FG-134 BALTECH FG-204 BALTECH FG-204-2 200
BALTECH FG-85 BALTECH FG-135 BALTECH FG-205 BALTECH FG-205-2 150
BALTECH FG-86 BALTECH FG-136 BALTECH FG-206 BALTECH FG-206-2
(21 pcs.) BALTECH FG-207-2 (32 pcs.)
100
Set 6 pcs.
0,1-0,4 mm
Set 7 pcs.
0,1-0,5 mm
Set 10 pcs.
0,1-1,0 mm
Set 11 pcs.
0,05-0,8 mm
L,mm
BALTECH FG-87 BALTECH FG-137 - - 75
 

Marketing Products

|  SCHENCK Dynamic Balancing Machines |  Vibration & Balancing Analyzer | Triaxial Wireless Accelerometer |  Vibration Monitoring |
|  Laser Shaft Alignment |  Thermal Imaging Device |  Dial Gauge Shaft alignment |  vibration analyzer and balancer |
|  Vibration Meter |  Oil & Lubrication Analysis |  Infrared Thermometer |  Bearing Induction Heaters |


Balancing Services

| Inhouse Balancing | Condition Monitoring & Vibration Analysis | Onsite Balancing Services | Laser Alignment |
Rotor Repair & Services SCHENCK Products | Training & Seminar  |

 

Our Locations

     
5, U.K. Industrial Estate, Behind Durian Furniture,
Opp. Oswal Park, 2nd Pokharan Rd,
Thane ( W ) - 400 601, (M.S)
 
4 / A Wing, Bharat Indl Estate, Off. Lake Road, Opp. Hind Rectifier Co.
Bhandup (W)
Mumbai – 400 078 (M.S)
 
 
R / 375, TTC Industrial Area, Rabale,
Navi Mumbai - 400701 (M.S)
 
Gat No # 256, Indrayani East, Jyotibanagar, Talawade, Pune 412 112 (M.S)